Upgrade Springs (AEG)

Showing 1–24 of 48 results

Show
Sort by
  • Action Army – Upgrade Spring M100 For Standard AEG Series

    £9.98 inc VAT

    Action Army – Upgrade Spring M100 For Standard AEG Series

  • Action Army – Upgrade Spring M95+ For Standard AEG Series

    £9.98 inc VAT

    Action Army – Upgrade Spring M95+ For Standard AEG Series

  • EagleSix M100 Upgrade Spring For TM AA12/SGR12

    £14.99 inc VAT

    Eagle6 Airsoft – M100 Spring For Automatic Electric Shotgun Series
    – M100, This will give around 345 FPS.
    – Made with high quality steel
    – Heat Treated
    – Measured every 10 springs
    – Linear Spring For Increased Consistency
    – Designed specifically for the Automatic Electric Shotgun Range
    – Ground Ends For Increased Consistency

  • EagleSix M100 Upgrade Spring For TM NGRS AEG

    £11.99 inc VAT

    Eagle6 Airsoft – M100 Spring For Next Generation Recoil Shock Series
    – M100, This will give around 349 FPS.
    – Made with high quality steel
    – Heat Treated
    – Measured every 10 springs
    – Linear Spring For Increased Consistency
    – Designed specifically for the Next Gen Recoil Shock AEG Range
    – Ground Ends For Increased Consistency

  • EagleSix M105 Upgrade Spring For TM NGRS

    £11.99 inc VAT

    – M105, This will give around 360 FPS.
    – Made with high-quality steel
    – Heat Treated

  • EagleSix M110 Upgrade Spring For TM NGRS

    £11.99 inc VAT

    Eagle6 Airsoft – M110 Spring For Next Generation Recoil Shock Series
    – M110, This will give around 360 FPS.
    – Made with high quality steel
    – Heat Treated
    – Measured every 10 springs
    – Linear Spring For Increased Consistency
    – Designed specifically for the Next Gen Recoil Shock AEG Range
    – Ground Ends For Increased Consistency

  • EagleSix M120 Upgrade Spring For TM NGRS

    £11.99 inc VAT

    – M120, This will give around 420 FPS.
    – Made with high-quality steel
    – Heat Treated

  • EagleSix M130 Upgrade Spring For TM NGRS

    £11.99 inc VAT

    Eagle6 Airsoft – M130 Spring For Next Generation Recoil Shock Series
    – M130, This will give around 430 FPS.
    – Made with high quality steel
    – Heat Treated
    – Measured every 10 springs
    – Linear Spring For Increased Consistency
    – Designed specifically for the Next Gen Recoil Shock AEG Range
    – Ground Ends For Increased Consistency

  • EagleSix M140 Upgrade Spring For TM NGRS

    £11.99 inc VAT

    Eagle6 Airsoft – M140 Spring For Next Generation Recoil Shock Series
    – M140, This will give around 440 FPS.
    – Made with high quality steel
    – Heat Treated
    – Measured every 10 springs
    – Linear Spring For Increased Consistency
    – Designed specifically for the Next Gen Recoil Shock AEG Range
    – Ground Ends For Increased Consistency

  • EagleSix M90 Spring For TM NGRS AEG

    £11.99 inc VAT

    Eagle6 Airsoft – M90 Spring For Next Generation Recoil Shock Series
    – M90, This will give around 320 FPS.
    – Made with high quality steel
    – Heat Treated
    – Measured every 10 springs
    – Linear Spring For Increased Consistency
    – Designed specifically for the Next Gen Recoil Shock AEG Range
    – Ground Ends For Increased Consistency

  • EagleSix M90 Upgrade Spring For TM AA12/SGR12

    £14.99 inc VAT

    Eagle6 Airsoft – M90 Spring For Automatic Electric Shotgun Series
    – M90, This will give around 315 FPS.
    – Made with high quality steel
    – Heat Treated
    – Measured every 10 springs
    – Linear Spring For Increased Consistency
    – Designed specifically for the Automatic Electric Shotgun Range
    – Ground Ends For Increased Consistency

  • EagleSix M90 Upgrade Spring For TM MK46 NGRS AEG

    £19.99 inc VAT

    – Around 320 FPS
    – High Quality
    – Fits TM MK46

  • EagleSix M90+ Upgrade Spring For TM NGRS

    £11.99 inc VAT

    – M90+, This will give around 335 FPS.
    – Made with high-quality steel
    – Heat Treated

  • EagleSix M95 Upgrade Spring For TM AA12/SGR12

    £14.99 inc VAT

    Eagle6 Airsoft – M95 Spring For Automatic Electric Shotgun Series
    – M95, This will give around 330 FPS.
    – Made with high quality steel
    – Heat Treated
    – Measured every 10 springs
    – Linear Spring For Increased Consistency
    – Designed specifically for the Automatic Electric Shotgun Range
    – Ground Ends For Increased Consistency

  • EagleSix M95 Upgrade Spring For TM NGRS

    £11.99 inc VAT

    Eagle6 Airsoft – M95 Spring For Next Generation Recoil Shock Series
    – M95, This will give around 340 FPS.
    – Made with high quality steel
    – Heat Treated
    – Measured every 10 springs
    – Linear Spring For Increased Consistency
    – Designed specifically for the Next Gen Recoil Shock AEG Range
    – Ground Ends For Increased Consistency

  • EagleSix Recoil Upgrade Spring For TM M4/416 NGRS

    £11.99 inc VAT

    – Increased recoil unit return rate
    – Slight increase in the cumulative recoil effect
    – Healthier Sopmod
    – Made with high-quality steel
    – Heat Treated
    – Measured every 10 springs
    – Linear Spring for increased consistancy
    – Designed specifically for the Next Gen Recoil Shock AEG Range

  • FPS 100 M/S AEG Upgrade SPRING (FPS100+)

    £6.98 inc VAT

    100 m/s FPS spring has been calibrated on 363 mm inner barrel and gearbox with type D cylinder (for barrels from 301 to 400 mm).
    Of course with shorter or longer barrel the performance will decrease or increase, therefore the calibration will be harder or softer.
    In the calibration process has not been taken in consideration the thickness due to the bearings of the spring guide and of the piston head.
    So starting by equal initial conditions you have to take into account of a performance increase of about 2.5 m/s for each bearing.
    The FPS spring is 100% Made in Italy and it is produced in collaboration with leading companies in the sector.

  • FPS 105 M/S AEG Upgrade SPRING (FPS105+)

    £6.98 inc VAT

    105 m/s FPS spring has been calibrated on 363 mm inner barrel and gearbox with type D cylinder (for barrels from 301 to 400 mm).
    Of course with shorter or longer barrel the performance will decrease or increase, therefore the calibration will be harder or softer.
    In the calibration process has not been taken in consideration the thickness due to the bearings of the spring guide and of the piston head.
    So starting by equal initial conditions you have to take into account of a performance increase of about 2.5 m/s for each bearing.
    The FPS spring is 100% Made in Italy and it is produced in collaboration with leading companies in the sector.

  • FPS 110 M/S AEG Upgrade SPRING (FPS110+)

    £6.98 inc VAT

    110 m/s FPS spring has been calibrated on 363 mm inner barrel and gearbox with type D cylinder (for barrels from 301 to 400 mm).
    Of course with shorter or longer barrels the performance will decrease or increase, therefore the calibration will be harder or softer.
    In the calibration process, the bearings of the spring guide and of the piston head.
    So starting by equal initial conditions you have to take into account a performance increase of about 2.5 m/s for each bearing.
    The FPS spring is 100% Made in Italy and it is produced in collaboration with leading companies in the sector.

  • FPS 120 M/S AEG Upgrade SPRING (FPS120+)

    £6.98 inc VAT

    120 m/s FPS spring has been calibrated on 363 mm inner barrel and gearbox with type D cylinder (for barrels from 301 to 400 mm).
    Of course with shorter or longer barrel the performance will decrease or increase, therefore the calibration will be harder or softer.
    In the calibration process has not been taken in consideration the thickness due to the bearings of the spring guide and of the piston head.
    So starting by equal initial conditions you have to take into account of a performance increase of about 2.5 m/s for each bearing.
    The FPS spring is 100% Made in Italy and it is produced in collaboration with leading companies in the sector.

  • FPS 85 M/S AEG Upgrade Spring (FPS85+)

    £6.98 inc VAT

    85 m/s FPS spring has been calibrated on 363 mm inner barrel and gearbox with type D cylinder (for barrels from 301 to 400 mm).
    Of course with shorter or longer barrel the performance will decrease or increase, therefore the calibration will be harder or softer.
    In the calibration process has not been taken in consideration the thickness due to the bearings of the spring guide and of the piston head.
    So starting by equal initial conditions you have to take into account of a performance increase of about 2.5 m/s for each bearing.
    The FPS spring is 100% Made in Italy and it is produced in collaboration with leading companies in the sector.

  • FPS 90 M/S AEG Upgrade Spring (FPS90)

    £6.98 inc VAT

    90 m/s FPS spring has been calibrated on 363 mm inner barrel and gearbox with type D cylinder (for barrels from 301 to 400 mm).
    Of course with shorter or longer barrel the performance will decrease or increase, therefore the calibration will be harder or softer.
    In the calibration process has not been taken in consideration the thickness due to the bearings of the spring guide and of the piston head.
    So starting by equal initial conditions you have to take into account of a performance increase of about 2.5 m/s for each bearing.
    The FPS spring is 100% Made in Italy and it is produced in collaboration with leading companies in the sector.

  • FPS 95+ M/S AEG Upgrade Spring (FPS95)

    £6.98 inc VAT

    95 m/s FPS spring has been calibrated on 363 mm inner barrel and gearbox with type D cylinder (for barrels from 301 to 400 mm).
    Of course with shorter or longer barrel the performance will decrease or increase, therefore the calibration will be harder or softer.
    In the calibration process has not been taken in consideration the thickness due to the bearings of the spring guide and of the piston head.
    So starting by equal initial conditions you have to take into account of a performance increase of about 2.5 m/s for each bearing.
    The FPS spring is 100% Made in Italy and it is produced in collaboration with leading companies in the sector.

  • Placeholder

    FPS Upgrade Spring (SRE100+) FOR TM NGRS

    £10.98 inc VAT

    The 100 m/s FPS spring is calibrated in collaboration with Daniele Cimadoro of Terni Softair.

    In the phase immediately following forming, the spring is stabilized in the oven at a temperature of 400 degrees centigrade for thirty minutes in order to optimize its duration over time.

    100% MADE IN ITALY
    100% COMPATIBLE MARUI

Show
Sort by